SKYZER TECHNOLOGIES
PAGE 46 OF 147
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Version 1.00
4.0
ACTIVE MERCHANTS
12345678
Press 3 to Set Active Merchants
Enter the number (from 1
–
8) for each individual merchant you wish to activate
and press
ENTER
Example: To activate merchants 1 to 5, enter 12345
5.0
MULTI MERCHANT
SETUP
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL
to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
6.0
MERCHANT 1 NAME
MERCHANT 1
Press 4 to Manually Set Merchant Name
To change the merchant name, use the numeric keypad then the
FUNC
key to
access the alpha characters. Press
ENTER
to advance to the next merchant name
NOTE: If the merchant name is not set, then terminal will automatically
use the names that are on the Paymark receipt header
7.0
MULTI MERCHANT
SETUP
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL
to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
5.3.1
Master Memory Reset
This function allows the merchant to reset the memory of the entire active
merchants on the terminal.
Step
Terminal Display
Description
1.0
Press
FUNC
2.0
FUNCTION?
Enter
7418
, press
ENTER
3.0
MULTI MERCHANT
SETUP
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL
to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
4.0
DELETE CONFIG?
ENTER=YES,CLR=NO
Press 8 to Delete Terminal Configuration
To delete the Terminal Configuration of the entire active merchants, press
ENTER
or
CLEAR
to return to
MULTI MERCHANT SETUP
screen.
