13
/
24
Mettre hors tension le terminal avant d’ouvrir la trappe.
MicroSD connector is located inside the terminal, in a closed
compartment.
Turn the terminal and remove the trapdoor.
MicroSD are identified by the engraved marks on the
lower housing.
Insert MicroSD card and push it to the end.
Close the trapdoor.
The terminal supports MicroSD up to 32GB.
4.3
Battery
4.3.1
Charging the battery
When does the battery need to be charged?
When used daily, the terminal charges its battery each time the power adapter is
connected. Charging starts automatically.
How can the battery be charged?
Using the power adapter
Connect the power adapter to the terminal USB type-C connector located on the left
side of the terminal.
Connect the power adapter to the power supply mains network.
Check the charging status on the top of the screen(it means battery charging).
4.3.2
Installing the battery
WARNING/ATTENTION
Check that the terminal is not connected to the main electric network.
Vérifier que le terminal n’est pas connecté au secteur.
Turn the terminal and remove the trapdoor.
Take the battery pack included in the box
Locate the battery pack connector beside the battery compartment
Plug the battery pack connector according to the connector locating system.
Place the battery pack in its compartment
Close the battery trapdoor.