Installation / Assembly
T-Rack
®
3.0 Series
– Assembly Instructions 1.1(2019-03) E inge
Page 53 of 84
© inge GmbH
5.9
Mounting Module 3
Step
Activity
Figure
1
Mount module 3
Number of persons: 4
a)
Continue holding modules 1 and 2 in position to prevent
tipping.
b)
Mount module 3 using the procedure described in section:
The filtrate pipe assembly faces module 1.
2
Screw the threaded pins (DIN 913) M10 x 50 into the upper T
pieces
Number of persons: 2
a)
Continue holding modules 1, 2 and 3 in position to prevent
tipping.
b)
On the T piece of module 1, screw in two threaded pins
(DIN 913) M10 x 50 using a hex key (size 5).
The pins should protrude by 30 to 31 mm.
c)
Repeat step b) for module 3.
back
front
= actual
1
2
3
30 - 31 mm
