SOUND DETECTAI USER MANUAL
32
IT TAKES 4-6 HOURS TO CHARGE AN EMPTY BATTERY PACK TO FULL.
8-1-2 How to Charge the Battery Pack
The battery pack charging instructions only work with Package 2; see page 15.
1.
Plug the power adapter cord into the battery charger.
2.
Plug the jack end of the power adapter into the battery pack.
3. Plug the power adapter cord
into a 110v/120V electrical outlet.
ENSURE THE BATTERY PACK IS NEAR ROOM TEMPERATURE BEFORE
CHARGING. DO NOT CHARGE THE BATTERY PACK IN EXTREMELY HOT
OR COLD AREAS. THE BATTERY PACK CAPACITY MAY BE DECREASED IF
CHARGED IN AN EXTREME TEMPERATURE ENVIRONMENT.
WHEN THE STATUS LED OF THE CHARGER IS RED OR YELLOW THE BATTERY
PACK IS BEING CHARGED. WHEN THE STATUS LED OF THE BATTERY PACK IS
GREEN THE CHARGE IS COMPLETE. THE STATUS LED IS GREEN WHILE THE
CONNECTOR IS CONNECTED TO THE BATTERY AND WHEN THE CONNECTOR
IS DISCONNECTED.
DO NOT STORE THE DEVICE WITH THE BATTERY PACK ATTACHED
TO
PREVENT DAMAGE TO THE BATTERY PACK OR THE DEVICE
. DETACH THE
BATTERY PACK FROM THE DEVICE BEFORE STORING.
THE BATTERY PACK INSTRUCTIONS ONLY APPLY TO PACKAGE 2 SEEN ON
PAGE 15.
DO NOT STORE THE DEVICE WITH THE BATTERY INSTALLED TO PREVENT
DAMAGE TO THE BATTERY OR THE DEVICE. REMOVE THE BATTERY FROM
THE DEVICE BEFORE STORING.
IF YOU DO NOT USE THE IMAGER FOR A LONG PERIOD OF TIME, PUT THE
DEVICE IN A COOL AND DRY ENVIRONMENT. THE BATTERY WILL DISCHARGE
OVER TIME; THEREFORE, THE IMAGER SHOULD BE CHARGED OCCASIONALLY
TO PREVENT DAMAGE TO THE BATTERY OR THE DEVICE.
