SOUND DETECTAI USER MANUAL
19
7-1
Package 1
7-1-1
Set Up
7.
Quick Start Instructions
B.
Power on device.
The Sound DetectAI is used
as a handheld device.
A.
THE SETUP INSTRUCTIONS ONLY APPLY TO PACKAGE 1 SEEN ON PAGE 14.
POWER ON THE DEVICE BY PRESSING THE POWER BUTTON.
PRESS THE
POWER BUTTON AGAIN TO POWER OFF THE DEVICE.
THE ACOUSTIC IMAGER NEEDS SUFFICIENT WARM-UP TIME FOR THE MOST
ACCURATE MEASUREMENTS AND BEST IMAGE QUALITY. THIS TIME CAN
OFTEN VARY BY ENVIRONMENTAL CONDITIONS. IT IS BEST TO WAIT A
MINIMUM OF 10 MINUTES FOR THE DEVICE TO COMPLETELY WARM-UP.
THE SYSTEM STARTS IN APPROXIMATELY 10-15 SECONDS. WAIT UNTIL THE
USER INTERFACE LOADS BEFORE ATTEMPTING AN ACOUSTIC INSPECTION.
