LL1000P® Plate printer
Copyright © 2003-20016 InfoSight Corporation All Rights Reserved
Page 13
DIAGNOSING PRINT-QUALITY ISSUES
If the tag is not securely seated in the plate pocket during the complete printing cycle (e.g., if the tag is not
flat or if the tag is smaller or larger than the pocket size), imperfect printing may result. Check that the tag
and plate are properly matched. Check the condition of the small rubber buttons in the pocket. A
magnifying glass may be helpful. If the buttons are missing or damaged, contact your sales representative
or the factory for a replacement. It is also possible to reduce the maximum and minimum stepper
frequencies for the internal plate feed rollers. This is accomplished from the Producer™ main menu, go to
SETUP…PRINTER CONFIGURATION…STEPPER MOTOR. See the built-in help screens for more
information.
POSSIBLE PRINTING ISSUES
NORMAL PRINTING
solid black text & barcode
TAG MOVING IN POCKET
random missing lines
TAG SLIPPING OUT
printing is visibly compressed
TAG SLIPPING OUT
printing is visibly stretched
