INFOSEC UPS SYSTEM
- 4, rue de la Rigotière - 44700 Orvault - France - www.infosec.fr
Hot Line :
tél : +33(0)2 40 76 15 82 -
fax :
+33 (0)2 40 94 29 51- [email protected] - 10 05 04 205 02
-
2
-
2 CAUTION
¾
The UPS contains voltages that are potentially hazardous. All repairs should be
performed by qualified service personal.
¾
The UPS has its own internal energy source (battery). The output receptacles may be
alive even when the UPS is not connected to an AC supply.
¾
Do not plug laser printer.
¾
The UPS is suitable only to computers and electronic equipment with substantially
rectifier or capacitive loads. It is not suitable to electronic equipment with significant
inductive loads, such as motors & fluorescent lamps.
¾
Be sure to operate within the power rating of the UPS. Below 1/2 or 1/3 of rated
power is recommended for longer backup time & longer battery life.
¾
Do not place the UPS near excessive humidity, under sunshine, or close to heat-emitting
sources.
¾
If the UPS is out of order, please unplug power cord and consult your dealer right away.
Do not remove cover if there is no serviceable part inside.
¾
The unit should be supplied by grounded source. Do not operate the unit without ground
source.
¾
The socket-outlet should be installed near the equipment and be easily accessible.
¾
Do not plug the UPS power cord into itself. That will result in a safety hazard.
¾
Installation should be performed by a qualified technician or electrician in accordance
with local electrical codes.
