Putting on the sensors.
Step 1. Breathing and chest movement sensors.
Step 2. Fingertip pulse oximeter.
A. Put on the T-shaped breathing sensor with horizontal arm
with black sensors pressed against the nostrils and vertical arm
touching the upper lip.
B. Pull the cord behind your ears as shown and stick the cords to
your cheeks with a woven tape.
C. Stick the rectangular chest movement sensors with a woven
tape against your sternum and abdomen as shown. Make
sure the sensors are tightly fitted.
A. Stick the cord with a woven tape around the edging and to
your wrist.
1
2
EVENT
EVENT
B
A
A. pulse oximetry sensor
B. breathing/airflow sensor
A. Turn the device on by pressing and holding the
„1” button for approx. 2 secs.
B. Lock the device by holding the „2” button for
approx. 2 secs. Padlock symbol will appear
on
top of the screen.
A. Unplug the sensors after waking up in the
reverse order to that shown in section ‘Putting
on the sensors’.
C. Put the cords behind the belt so they don’t
limit your movement.
Step 3. Connecting the sensors to
the device and initiating diagnostic
session.
Step 4. Starting diagnostic session.
Step 5. Ending diagnostic session
Device preparation.
