25
6.5 Ethernet Connection Parameters Setting
1.Click "Setting", then click "Communication Settings";
2."IP address", "subnet mask", "gateway address", "DNS address" and "TCP port
number" can be set according to requirements. Take the IP address as an example, the IP
address can be directly entered by keyboard according to requirements;
3. After the IP address input is completed, click the "Confirm" button, the set IP address
will be displayed in the list, click the "Set Download" button, the buzzer of the code reader
will prompt that the setting is successful, and the setting status is displayed successfully,
that is, the setting is successful;
4. "Subnet mask", "Gateway address", "DNS address" and "TCP port number" can be set
according to the IP address setting method.
