20
6.2 Getting a Clear Image
1. Method 1 Select the monitor and click "Auto Focus" ;
2. Enter the auto focus prompt dialog box;
3. After the auto focus is successful, a dialog box will pop up, click OK, and the code
reader will select the recommended parameters; there may be multiple recommended
parameters, you can click the drop-down to select;
4. After the auto focus is successful, enter the continuous viewing mode directly. In the
example shown in the figure, the barcode area of the image is blurred before
auto-focusing. After successful auto-focusing, the barcode area of the image is clear and
the barcode area of the image is displayed in a green frame. , indicating that the image
barcode can be decoded normally;
Before focusing
After focusing
