28
Installation Procedures Overview
Following all the instructions provided below can minimize system installation time.
Detailed, illustrated instructions for each component are given in the following
sections.
1. Unpack:
Unpack the system and confirm all components have been received
against the Unpacking List.
2. Install hard drives:
Separately purchased SATA hard drives must be individually
installed into the drive trays.
3. Install drive trays:
After the hard drives have been installed into the drive trays,
you can install the drive trays into the enclosure (install trays
AFTER
the
enclosure has been placed well).
4. Cable connection:
Use the supplied power cords to connect the system to main
power. It is recommended to connect power cords to separate and independent
power sources (different circuit breakers for redundancy).
5. Power up:
Once the components have been properly installed and all cables are
properly connected, you can power up the system and configure it.
