vi
Important notice
The use of Infortrend-certified components is strongly recommended to ensure compatibility, quality,
and normal operation of your Infortrend products. Contact your distributor for a list of Infortrend-certified
components (e.g. SFP, SFP+, HBA card, iSCSI cable, FC cable, memory module, etc.).
ESD precautions
•
Avoid touching the PCBs (printed circuit board) or connector pins of the hard drives.
•
Avoid dust, debris, carpets, plastic, vinyl, and Styrofoam in your work area.
•
DO NOT remove the hard drives from their anti-static bags before the installation.
•
DO NOT stack the drives on top of each other without their protective drive trays. Even if the drives
are fixed to the drive trays, contact with the exposed PCB or the rear side interface may damage
the drives.
About this manual
The manual introduces hardware components of EonStor GSe Pro 100 Series storage system and
expansion enclosures. It also describes how to install the components, monitor, and maintain.
•
For non-serviceable components, please contact our support sites.
•
Firmware operation: Consult the Firmware User Manual on the CD-ROM.
•
EonOne software: Consult the EonOne User Manual on the CD-ROM.