viii
Hardware specifications
Specification summary
Form factor
4U EonStor GSa 5100
4U EonStor GSa 5200
Controller
Dual redundant controllers
Memory
GSa 5100:
- 32 GB DDR4
- 64 GB DDR4
- 128 GB DDR4
- 256 GB DDR4
- 512 GB DDR4
GSa 5200:
- 64 GB DDR4
- 128 GB DDR4
- 256 GB DDR4
- 512 GB DDR4
- 1024 GB DDR4
Note: The installed default memory varies by model, region,
and other factors. Contact your local sales representative for
details.
Host ports
GSa 5100:
- 8 x 10 Gb/s iSCSI ports/ RJ45 (4 per controller)
- 8 x 16 Gb/s Fibre Channel ports (4 per controller)*
- 8 x 40 Gb/s iSCSI ports/QSFP (4 per controller)
- 8 x 56 Gb/s Infiniband ports (4 per controller) - for
Linux only
- 16 x 1 Gb/s iSCSI ports (8 per controller)
- 16 x 8 Gb/s Fibre Channel ports (8 per controller)*
- 16 x 10 Gb/s iSCSI ports/ SFP+ (8 per controller)
- 16 x 10 Gb/s FCoE ports (8 per controller)
- 16 x 16 Gb/s Fibre Channel ports (8 per controller)*
- 32 x 12 Gb/s SAS ports (16 per controller)
GSa 5200:
- 32 x 10 Gb/s iSCSI ports/ RJ45 (16 per controller)
- 32 x 12 Gb/s SAS ports (16 per controller)
- 32 x 16 Gb/s Fibre Channel ports (16 per controller)*
- 32 x 40 Gb/s iSCSI ports/QSFP (16 per controller)
- 32 x 56 Gb/s Infiniband ports (16 per controller) - for
Linux only
- 64 x 1 Gb/s iSCSI ports (32 per controller)
- 64 x 8 Gb/s Fibre Channel ports (32 per controller)*
- 64 x 10 Gb/s iSCSI ports/ SFP+ (32 per controller)
- 64 x 10 Gb/s FCoE ports (32 per controller)
- 64 x 16 Gb/s Fibre Channel ports (32 per controller)*
* Supports point-to-point and switch mode
Cache backup technique
BBU + Flash module
Drive connectivity
12 Gb/s SAS connectivity
Supported drives
2.5-inch SATA SSD
2.5-inch SAS SSD
Note: Refer to Compatibility Matrix for the latest compatibility
details
(See next page)
