Slide Rail Kit
61
NOTE
Compared to 9373CSlider kit, the other two slide rail kits differ in that the
9CCSlider kit has a “Slide Stopper” and 9N1CSlider kit’s left and right brackets are
longer in length.
5.2.2
Installation Procedure
The installation begins with installing the inner glides
(03)
to the left and right side
of the enclosure using #6-32 L6 flathead screws
(07)
. Make sure the protruding
end (indicated by the
black arrow
) is bent inward as shown in the top view
illustration.
07
03
If the cage posts do not have threaded holes, cage nuts
(08)
are provided to be
mounted onto the posts for cross recess truss head screws M5 x 9.0mm
(05)
to
secure the enclosure. Please refer to the illustration below that matches your
enclosure dimensions.
05
08
05
