Multitron Pro - Incubation Shaker
Setup and function
2013-02-19
Page
69
of
185
NOTICE!
An optional control program is available for
simultaneous operation of the humidification and
the cooling system.
If the illumination is switched on, the maximum humidity may
not reach 85% rH under all conditions.
Fig. 34
The Direct Steam Humidification is mounted on the rear of the
housing.
A controlled pump feeds water dropwise into an evaporator
chamber via a feed hose. The steam is then fed directly into the
incubation chamber.
There are two types of water supply:
unpressurised from a water tank
pressurised to max. 0.3 bars from a pressurised pipeline
4.11 Option CO
2
gassing
The incubator shaker is equipped with a CO
2
gassing unit.
This comprises:
A controlled CO
2
gassing device
A transparent safety curtain inside the chamber (the gassing
unit can be operated without the curtain fitted)