inform DSP FLEXIPOWER SERIES, User Manual

Page: 35 / 52

30
7. OPERATING PROCEDURES
7.1. UPS Default Data and Special Function Execution
After UPS completely starts up, press FUNCTION (10) key pad to change the LCD display screen to
drawing Q1.
Q1
* It shows buzzer is “On”.
Q2
* It shows buzzer is “Off”.
Press
key pad to scroll down the screen and check the UPS settings. The LCD display will show in
consequence between Drawing Q1(buzzer)

Drawing R1(Self-test)

Drawing S1(Bypass Voltage
Windows)

Drawing T(Output Frequency Synchronization Window)

Drawing U(Inverter Output
Voltage)

Drawing V1(UPS Operation Mode)

Drawing W(Output Voltage Micro Tune Value)

Drawing X(UPS Id)

Drawing Y(Parallel function status).
R1
* It shows self-test is NOT “on”.
R2
* It shows self-test is “on”.