InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 84 / 128

84
Chapter 2
Configuring The LQ-1600K Emulation With Control Codes
Superscript And Subscript Printing
ASCII Code ESC S
n
Hex Code 1B 53 n
Dec Code 27 83 n
Purpose Selects superscript or subscript printing.
Where:
n
= NUL (hex 00) or 0 (hex 30) to enable superscript printing
n
= SOH (hex 01) or 1 (hex 31) to enable subscript printing
Comment Superscript prints full-sized characters with a baseline higher
than the normal characters. Subscript prints full-sized
characters with a baseline lower than the normal characters.
When the control code is received, all characters are
superscript or subscript until reset by ESC T or printer reset.
You can print both superscript and subscript characters in the
same character column by using the Backspace (BS) control
code, but these characters will not print when double high
printing is in effect.
Example The following program illustrates superscript and subscript
printing.