InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 72 / 128

72
Chapter 2
Configuring The LQ-1600K Emulation With Control Codes
Set Chinese Inner Code (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0 T A n
Hex Code ASSC 30 54 41 n
Dec Code ASSC 48 84 65 n
Purpose Select code page as:
n = 0x30: Big5 (default)
n = 0x31: NS
n = 0x32: DCI
n = 0x36: IBM5550
n = 0x37: UTF8
Comment This control code does not function while in non DBCS mode.
Set Font/Line Gap (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0 T G m n1 n2 n3 n4
Hex Code ASSC 30 54 47 m n1 n2 n3 n4
Dec Code ASSC 48 84 71 m n1 n2 n3 n4
Purpose To set inter-character and inter-line spacing in dot by 300 dpi,
which will convert to dot by 180 dpi. The inter-char spacing is
set according to DBCS ASCII character.
Where
m = 0x30: set inter-char spacing
m = 0x31: set inter-line spacing
Comment This control code does not function while in non-DBCS mode.
Set Font Scale (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0 T W n1 n2
Hex Code ASSC 30 54 57 n1 n2
Dec Code ASSC 48 84 87 n1 n2
Purpose Character expands as: n1-vertical expand, n2-horizontal
expand
n1, n2 = 0x30: reset
n1, n2 = 0x31: normal (1x1)
n1, n2 = 0x32: expand twice (double height, double width)
When n1=0x32 (double height), the line spacing will double.
Where
n1, n2 = 0x30~0x32
Comment This control code does not function while in non-DBCS mode.