InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 66 / 128

66
Chapter 2
Configuring The LQ-1600K Emulation With Control Codes
Select Italic Character Set
ASCII Code ESC t
n
Hex Code 1B 74 n
Dec Code 27 116 n
Purpose Selects the italics character set from hex 80 through hex FF.
Where:
n
= SOH (hex 01) or 1 (hex 31) selects the graphics character
set
n
= NUL (hex 00) or 0 (hex 30) selects the italics character set
Comment The graphics character set is assumed to be the IBM Graphics
Code.
Select Print Quality
ASCII Code ESC x n
Hex Code 1B 78 n
Dec Code 27 120 n
Purpose Selects print quality.
Where:
n = NUL (hex 00) or 0 (hex 30) selects Hi-Speed
n = SOH (hex 01) or 1 (hex 31) selects LQ
n = STX (hex 02) or 2 (hex 32) selects Near LQ
n = ETX (hex 03) or 3 (hex 33) selects Super Hi-Speed
n = EOT (hex 04) or 4 (hex 34) selects Normal
n = ENQ (hex 05) or 5 (hex 35) selects Ultra Hi-Speed
Comment This command overrides control panel print quality selections.