InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 42 / 128

42
Chapter 2
Configuring The LQ-1600K Emulation With Control Codes
Form Feed
ASCII Code FF
Hex Code 0C
Dec Code 12
Purpose Prints the data in the buffer, if any, then moves the paper to the
top of the next form.
Comment The simulated print head moves to the left margin. This code
cancels all single line print attributes.
Graphic Printing
ASCII Code ASSC 0 * m nL nH d1...dk
Hex Code ASSC 30 2A m nL nH d1...dk
Dec Code ASSC 48 42 m nN nH d1...dk
Purpose Prints dot-grphics in 16 or 24-dot columns, depending on the
following parameters:
Where:
m specifies the dot density
nL, nH specifies the total number of columns or graphics data
that follow (number of dot columns) = ((nHx256) + nL)
d1...dk specifies bytes of graphics data; k is determined by
multiplying the total number of columns times the number of
bytes required for each column.
Parameter
m is ASSC*
Horizontal
Density (dpi)
Vertical
Density (dpi)
Dots Per
Column
Bytes Per
Column
0 180 180 24 3
1 90 180 24 3
2 120 120 16 2
3 90 144 24 3
4 90 120 16 2
5 90 90 16 2