InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 22 / 128

22
Chapter 2
Configuring The LQ-1600K Emulation With Control Codes
Align Two Half-Width Rotated Characters In
DBCS Mode
ASCII Code FS D
Hex Code 1C 44
Dec Code 28 68
Purpose Aligns two half-width rotated characters to fit the space
occupied by a normal size rotated character.
Comment Right after the control code sequence, two characters are
paired. The characters are not required to be half-width to be
aligned, because the command automatically takes care of
that. It is only necessary for the characters to be rotated in
order for the command to take effect. Only two characters are
combined at a time.
This command does not function while in non-DBCS mode.
Example The following program demonstrates the function of the
command.