InfoPrint 6500-v05, User Manual

Page: 98 / 340

Print Language
PRINT LANGUAGE specifies the set of print languages used by the printer. Refer
to the previous page for print language menus.
v
Standard Print Language (the default)
v
Alternate Print Language Provides code pages compatible with 6408/6412
Model CT0 printers.
Specifying a print quality of OCR A or OCR B will change the print language to
OCR A or OCR B.
When OCR A or OCR B is selected as the default print language, OCR A and OCR
B are the only available values for this print quality. If a different print quality
value is desired, the print language must be changed first.
Print Character Table
PRINT CHARACTER TABLE prints out a table of the 5250 interface current
character set.
Character sets are shown in the InfoPrint 6500 Coax/Twinax Programmer’s Reference
Manual .
Active Print Language
Selects which group of print language sets (Standard or Alternate) will be active.
v Standard Print Language
(the default)
v
Alternate Print Language
Hex Transparent Control
This option allows you to enable (the default) or disable additional features that
are not available in standard IBM emulations. To access these features, send lead-in
character text commands in the data stream. You can also use ASCII codes X'80'
through X'9F' as control codes if configured to do so.
82
InfoPrint 6500-V User’s Manual