InfoPrint 6500-v05, User Manual

Page: 80 / 340

Print Text Direction
PRINT TEXT DIRECTION specifies the direction in which characters are printed
on the page. This allows the printer to print languages that are printed right to left
instead of left to right.
v
Control By Host (the default)
v
Left To Right
v
Right To Left
Override Host
OVERRIDE HOST determines whether the printer executes certain commands sent
by the host, or continues to use the current printer settings. The following host
commands are ignored when OVERRIDE HOST is enabled: line length, forms
length, lines per inch (LPI), characters per inch (CPI), print quality, and text
orientation (that is, left to right). When OVERRIDE HOST is enabled, these settings
retain their operator panel settings.
Note: Host margin and tab settings will be used whether or not OVERRIDE HOST
is enabled.
v
Disable (the default). Allows certain host commands (line length, forms length,
LPI, CPI, print quality, and text orientation) to override operator panel settings.
Note that the information appearing on the message display may not match the
data stream setting. No values will change upon initial selection of the disable
option.
v Enable
. Permits operator panel settings to override host data stream commands.
Format Control
FORMAT CONTROL enables the printer to reflect the same spacing as 6408/6412
Model CT0 printers after absolute and relative move commands are executed. The
following options are available:
v Disable (the default). Does not reflect distance, generated by the Code V feature,
IGP feature, and Hex Transparent control code sequence, in the new position
(after absolute and relative move commands are executed).
v
Enable . reflects 6408/6412 Model CT0 distance, generated by the Code V
feature, IGP feature, and Hex Transparent control code sequence, in the new
position (after absolute and relative move commands are executed).
64
InfoPrint 6500-V User’s Manual