InfoPrint 6500-v05, User Manual

Page: 73 / 340

Config Key Default
This option configures the config key to print either the Quick Setup menu or the
full config.
v
Quick Setup Config (the default). Prints the Quick Setup configuration.
v
Complete Config . Prints the full configuration.
Name Custom Sets
You may specify a 39-character name which can be used to refer to a custom set.
The name you enter for a custom set will be used in the Recall Custom Set, Save
Current Values, Delete Custom Set, Change Power On Set, Protect Custom Sets,
Print Custom Set Values, and Name Custom Sets menus. The name can only be
cleared by using the Reset Custom Set Names menu.
Press the SCROLL/MICRO or SCROLL/MICRO keys to cycle through the
values available for that character at the cursor location. Press the
SCROLL/MICRO key to move to the next character to be modified. Press the
SCROLL/MICRO key to go back to a character you have already modified.
Continue until you have entered the name you want to give to this custom set,
then press
ENTER to save. The name you entered will now represent this custom
set on the printers front panel. To exit this menu without saving, press any key
other than the
ENTER key. The custom set name will revert to the last saved
value.
Reset Custom Set Names
You can reset specific custom set names back to the default value of the
configuration number.
Chapter 4. The Configuration Menus
57