InfoPrint 6500-v05, User Manual

Page: 69 / 340

Ribbon End Point
This parameter adjusts the point at which the system will declare the ribbon as
being expended. The life count will always be from 100% to 0%, but if a darker
setting is selected 0% will be reached more quickly. If a lighter setting is selected,
the system will extend the time it takes to reach 0%. The range of values are as
follows:
v
−4 (the default)
v Normal
v
1 through 6
v Lighter −1 through Lighter −10
Note:
This value can be adjusted at any time and the display will automatically
adjust to show the correct percentage relative to the new end point.
Ribbon Action
v
Stop Ribbon End (the default). Stops ribbon action when ribbon life reaches 0%.
v
Ignore Ribbon End When selected, the ribbon life display remains on the
control panel, and the printer continues to monitor ink consumption.
Chapter 4. The Configuration Menus
53