InfoPrint 6500-v05, User Manual

Page: 203 / 340

Slashed Zero: Prints zeros with a slash, when enabled, to distinguish zeros from
the alphabetic capital “O”.
v
Disable (the default)
v
Enable . Prints zeros with a slash.
Text Position: Specifies where the text will be positioned in the line space. When
set to Top of Line, text will be positioned at the top of the line space. When set to
Bottom of Line, the text will be positioned as if it were at the bottom of a 6 lpi line
space.
Bottom Of Line (the default)
Top of Line
The following example shows both Top of Line and Bottom of Line text positions
for a 6 LPI line spacing:
UTF-8:
v
Disable (the default).
v
Enable . Selects the UTF-8 character set (Unicode encoded font).
Margins
Note: LEFT MARGIN and RIGHT MARGIN selections are not available with the
Coax/Twinax emulation. The only variable available with the Coax/Twinax
emulation is BOTTOM MARGIN.
The MARGINS parameter defines where the bottom, left, and right page margins
are located.
C2qu0108
Figure 62. Top of Line and Bottom of Line Text Positions
Chapter 4. The Configuration Menus
187