MAG-200 Operator Guide Rev 1.05.
Boot Mode
Sets the mode of the basic program loading. The following values are possible.
•
DHCP;
•
NAND.
Device Info
Information of the device. The same information of the device and current IP can be
obtained by issuing the command “/usr/bin/info.sh”
Loader Info
Information on the bootloader version and date of creation. This information is sent by
the bootloader on dhcp request.
Image Info
Information on the image stored in nand-flash. This information is set by standard
bootstrap when upgrading the image.
Version
The image version on the device is a number. The version is set by the operator in the
process of forming the image. Standard bootstrap checks the version number on the
device and performs upgrade only if the image version number is higher than the one
installed or if the versions of images are the same and the value of item ““Forced” is set
to “Yes”.
In this way the protection against double upgrade and return to the previous version
image is realized.
This menu item sets the variable “Image_Version”
Date
The date of the image creation.
This menu item sets the variable “Image_Date”
Description
Short description of the image. It is set by the operator when creating the image.
This menu item sets the variable “Image_Desc”
Forced
6