September 4, 2012
INFODRAW PMRS-100 User Manual v5.1
60
2-3-2 MRS USB Drivers Installation:
The MRS USB Drivers must be installed on your PC to allow communication between the
PMRS unit and the PC, through the USB Cable.
2-3-2-1 Drivers Installation for Windows XP, Vista, 7 (32Bit):
To setup the USB Drivers on Windows XP, Vista or 7 (32Bit), please make sure you have the
following two files located in the same folder on your PC:
a)
idmrs.inf
b)
idmrs.sys
If you are downloading the files from
, sometimes the file
“idmrs.inf”
can only be downloaded by right-clicking the link and pressing the “save link
as…” option.
Once the above two files are on your PC, follow these instructions to install the drivers:
1)
Make sure the SIM card is
NOT
inserted into the PMRS unit.
2)
Change the 2 left dip switches (numbers 1,2 to external USB mode - up position)
3)
Connect the USB cable between the unit (Mini USB Input) and a PC (XP or Higher).
4)
Turn on the unit and wait about 1 minute.
5)
After a few seconds the system will show –
6)
After another few seconds the system will ‘detect new hardware’.
