September 4, 2012
INFODRAW PMRS-100 User Manual v5.1
58
2-3 PMRS Unit Configuration:
The PMRS unit is based on embedded hardware/software with built-in cellular network
interfaces.
The unit must be configured prior to operation. This process includes pointing the unit’s
connection settings to the IP address of the server. Furthermore, the unit’s cellular
connection settings must adhere to those of the cellular provider in use. In particular, the
cellular provider’s APN (Access Point Name) must be provided. The unit is configured using
the Device Configurator software, by connecting a USB cable between the unit and a
computer (XP or higher).
In order for the “
MRS device Configurator
” to work and communicate with the unit, the
following two elements have to be installed on your PC:
1)
MRS Device Configurator software.
2)
MRS USB drivers.
2-3-1 MRS Device Configurator Installation:
To setup the
“MRS Device Configurator Application”
, follow these instructions:
1)
Run the
“Setup_MRS_DeviceConfig.msi”
file.
2)
Click
“Next”
.