InFocus INF5501, Hardware Manual

Page: 41 / 58

www.infocus.com
JTouch-00-RS232-Commands
41
JTouch-00-RS232-Commands
InFocus JTouch 00 Series RS232/LAN Commands INF6500, INF7500,
INF8600, INF9800
Connection
The JTouch 00 can be connected by RS232 or LAN port.
Details on the settings can be found below under each
connection type.
RS232 Settings
Baud Rate 38400bps
Data bit 8bits
Parity None
Stop bit 1
LAN Settings –
These are
configured in the main menu
IP [IP address]
Port 4660
Result
Set success reply 6B 30 31 79 0D
Set fail reply
6B 30 31 6E 0D
Set List
Set Function
Command
Code (HEX)
HEX (ID=1)
C. ID Ty Cm #1 #2 #3 CR ASCII ID=01
Display Power Off 41(A) 6B 30 31 73 41 30 30 30 0D k01sA000<CR>
Display Power On 41(A) 6B 30 31 73 41 30 30 31 0D k01sA001<CR>
Input Select: ATV 42(B) 6B 30 31 73 42 30 30 30 0D k01sB000<CR>
Input Select: DTV 42(B) 6B 30 31 73 42 30 31 30 0D k01sB010<CR>
Input Select: AV 42(B) 6B 30 31 73 42 30 30 31 0D k01sB001<CR>
Input Select: YPbPr 42(B) 6B 30 31 73 42 30 30 33 0D k01sB003<CR>
Input Select: HDMI 42(B) 6B 30 31 73 42 30 30 34 0D k01sB004<CR>
Input Select: HDMI1 42(B) 6B 30 31 73 42 30 31 34 0D k01sB014<CR>
Input Select: HDMI2 42(B) 6B 30 31 73 42 30 32 34 0D k01sB024<CR>
Input Select: VGA 42(B) 6B.30 31 73 42 30 30 36 0D k01sB006<CR>
Input Select: OPS1 42(B) 6B 30 31 73 42 30 30 37 0D k01sB007<CR>
Input Select: DP 42(B) 6B 30 31 73 42 30 30 39 0D k01sB009<CR>
Input Select:
Launcher/Main
(Android)
42(B) 6B 30 31 73 42 30 30 41 0D k01sB00A<CR>
Contrast 43(C) 6B 30 31 73 43 3x 3x 3x 0D k01sCxxx<CR>
Brightness 44(D) 6B 30 31 73 44 3x 3x 3x 0D k01sDxxx<CR>
Sharpness 45(E) 6B 30 31 73 45 3x 3x 3x 0D k01sExxx<CR>
Saturation 46(F) 6B 30 31 73 46 3x 3x 3x 0D k01sFxxx<CR>
Hue 47(G) 6B 30 31 73 47 3x 3x 3x 0D k01sGxxx<CR>