3x1 Wallplate Transmitter Switcher Kit
INFOBIT AV
www.infobitav.com
1. Product Introduction
Thank you for choosing the WP301-KIT-EU 3x1 Wallplate Transmitter Switcher Kit,
which consists of a wallplate transmitter switcher and a receiver. The kit is designed to
switch and extend HDMI or USB-C source signal to far-end display device, and the
transmission distance is up to 131ft/40m at 4K and 229ft/70m at 1080p video by using
a single CATx cable.
The switcher features two HDMI and one USB-C inputs, it can be selected by the
SOURCE AUTO
button on the front panel. The switcher supports CEC. The
DISPLAY
ON/OFF
button on front panel is used to control the far-end display device, and it can
be programmed by IR learning or RS232 command to ensure the compatibility with
various display devices. Moreover, bidirectional 24V PoC allows the switcher to
powered from the compatible HDBaseT receiver, or the receiver can be powered from
the switcher.
1.1
Features
Supports HDMI signal up to 4K@60Hz 4:4:4, USB-C signal up to 4K@30Hz 4:4:4.
Supports HDMI V2.0 standard and HDCP 2.2 compliant. Ensures display of content-
protected media and interoperability with other HDCP compliant devices.
Active input automatic detective.
Extending HDMI signal 4K@60Hz up to 131ft/40m and 1080p@60Hz up to
229ft/70m.
The USB-C supports video and USB data transmission.
Supports RS232 control with HDBaseT connection and local control.
Supports bidirectional IR pass-through to control display device from local and
control source device from remote.
Supports CEC to turn on/off display by the DISPLAY ON/OFF button, and the button
can be programmed by IR learning feature or RS232 command.
Supports bi-directional 24V PoC power supply and wide voltage power receiving
(12~48V), only one power adapter required.
Supports USB 2.0 KVM solutions.
Micro-USB port for firmware upgrade.
