3x1 Wallplate Transmitter Switcher Kit
INFOBIT AV
www.infobitav.com
4. System Connection
The following diagram illustrates typical input and output connection that can be utilized
with the extender:
5. IR Control
This product supports backwards and forwards IR, allowing IR signals to be passed
over the CAT cable to the source device or the display.
Source IR Control (Backwards IR)
This allows you to control a source device at the display (TV) end, where the receiver
is.
1)
Plug the IR emitter into the IR OUT port in the switcher.
2)
Find the IR location on your source device (where you normally point the remote
control) and then place the IR emitter in front of it.
3)
Plug the IR receiver into the IR IN port in the receiver.
4)
Attach the IR receiver onto or near the display (TV) where you would point your
remote control to use your TV.
Display IR Control (Forwards IR)
Tx
Rx
1
2
3
HDCP
LINK
HDBT OUT
PoC
Keyboard
Receiver
MacBook
PC
Laptop
Transmitter
USB-C:
HDMI:
IR Control:
HDBaseT:
RS232 Control:
USB Control:
Projector
Projector Screen
PoC
Remote
IR
Receiver
IR Emitter
