17
Output
UI Element
Description
Output
Timing
Set the output timing for the HDMI output ports. Two operation methods are offered in
the following:
Auto
: select to output the maximum resolution supported by display based on the
display
’
s EDID. E.g. If display supports up to 4K@60Hz, the switcher will output
4K@60Hz.
Resolution range list
: select a desired output resolution from the dropdown menu
to output this fixed resolution.
By default, it's set as
Auto
.
Refresh
Click to refresh to the latest status of the output timing.
Output
HDCP
Support
Set the HDCP capability for the HDMI output. Two options are offered in the following:
Enable:
select to enable HDCP capability of the output.
Disable:
select to disable HDCP capability of the output.
By default, it's set as
Enable
.
Auto Standby
(0~60
minutes)
Set a period of time that remains before the countdown timer begins for auto standby.
For example, when the current input is Guide Screen, 1 minute means if there
’
s no
signal present at the display in 1 minute, the countdown timer for display standby
begins; when the timer ticks to zero, the display enters standby mode.
Note:
If the connected display doesn
’
t support CEC or isn
’
t correctly set with RS232
commands, the word
“
Standby
”
appears in the middle of the Guide Screen.
If it
’
s set to 0 minute, it means this function is disabled, you cannot set the display to
standby mode.
By default, auto standby is set as
1 minute
.
Apply
Click to perform current settings.
Sink Power Management