11/22
6.2 Installation Steps
Step 1:
Determine the installation position, draw lines according to the
opening size, and make sure the lines are straight and correct.
Step 2:
Open the hole along the pre-drawn lines. The edge of the hole must
be flat and tidy to prevent scratches to the product. The opening error should
be controlled /-2mm.
Step 3:
Clean the desktop and surrounding environment to ensure that the
installation environment is clean and tidy.
Step 4:
Take the desktop input terminal (ShareBox Master/ShareBox Slave)
out of the package and gently put it into the hole opened in advance to
ensure that the product fits the desktop tightly.
As shown in the figure below: