infobit iCam P11, User Manual, Page: 22 / 47

12
5.2.2. Basic Parameters Setting
5.2.2.1 Debug
Enable and disable display current status of face detection of full-view camera.
Pos correct: it can be adjusted if the target is not always in the middle of the image when camera
is in tracking mode,.
5.2.2.2 Blocking zone
Blocking zones: To avoid incorrectly framing moving objects on screens, these 8 blocking zones
are used to block screens in the full-view camera image, they can be configured independently,
moving obiects inside the blocking zones of the full-view camera will not be detected or framed.
5.2.2.3 Tracking Parameters
Track Sens: set sensitivity of tracking based on range of movement, if value is big, camera tracks
at minor movement range.
Zoom Sens : Set sensitivity of zoom during tracking. High sensitivity will cause zoom in or out
Warning

The camera has been debugged before leaving the factory and is suitable for best room
view, do not use the pos correct function frequently.