13
6th Floor of Block A, Changbai Technology Park, No.8
Zhenzhu RD, Xinzhan General Pilot Zone
China, Anhui, Hefei
，
230012
0551-6282982
Fig. 6-5 Compass calibration interface
6.8 Image Calibration (Only for Attachment)
When Xclip is installed on the white light sighting tool as an infrared extension
component, if the cross division of the white light sighting is not in the center of the
infrared image, the image calibration function can be used to shift the infrared image
to ensure the position consistency between the white light image and the infrared
image.
Fig. 6-6 Image calibration interface
Operation:
In normal display mode, press the
M (13)
button and
C (14)
button for 3s at
the same time to enter the image calibration interface (fig. 6-6).
