13
14
1
Make sure the
massage rollers in the
upper backrest are not
operating, then sit on the
chair slowly to avoid injury
caused by incorrect
positioning of the head
rollers.
Body-Sensing Scan Technology
During the body scan, if the massage chair
can’t detect the position of your body, it
defaults to the middle position (shoulders).
▲
Armrests cannot be moved during
massage chair reclining process.
Check
Adjustment Before Massage
Caution
Safe Chair Environment
Inspect Environment
Don’t use the chair in wet places, like near
a swimming pool or in the bathroom, as
this could cause damage or electric shock.
Don’t place under direct sunlight, near
the stove, or in other hot environments
to avoid upholstery deterioration.
Place the chair on a level surface to
prevent sliding or unexpected damage.
Check In Front of and Behind Chair
When reclining the chair and extending the leg
rest, make sure there are no obstacles in front
of or behind the chair.
Check Power Cord and Plug
Space Requirements
Position the back of the chair at least 4
inches from wall.
(1) Regularly clean the plug of any dust using
a dry cloth.
(2) Ensure the power cord is not damaged,
bent, stretched, knotted, or caught under
anything, including the chair.
Leave at least 12 inches in front of the leg
rest.
Check Chair Surroundings
When reclining the backrest or extending the
leg, be sure to:
(1) Check all sides of the chair for any people
or objects.
(2) Confirm there is sufficient space for the
chair to fully extend.
C
h
a
ir
O
p
e
ra
tio
n
Recommendations
Adjustment Before Massage
Safely Moving Your Massage Chair
Adjusting the Chair Before Your Massage
Caution
Do not move the chair during operation in
case of accidents or damage.
C
h
a
ir
O
p
e
ra
tio
n
How to Move Your Chair
Bind the cables and put them on the seat to
avoid damage while moving the chair.
Do not drop the chair in order to prevent damage
to the internal parts and functions.
Do not slide the chair if the floor is made of
wood or other easy-damaged material. Two (2)
or more people will be required to lift the chair.
Make sure the power is off and the plug
doesn't drag on the floor. Leave the
chair in its upright position to
prevent the backrest from
hitting the floor.
To Move the Chair by Pushing:
Lift by the leg rest to tilt the chair back on its
base. Then, push the chair to desired
destination and set it down.
Be sure to hold the footrest to move the
chair as shown in the picture to avoid
scratching the leatherette.
If you feel the
massage isn’t strong
enough, remove the
pillow or cushion to
increase intensity.
Because the chair is heavy, it could mark or
damage your floor. Please place a blanket or
other protection under
the chair to prevent
damage.
Before Adjustment
Remain still and make sure the body scan is
finished correctly for the best massage.
Correct Position:
Your back
should be flush to the
backrest, with your head
lying flat on the pillow.
The remote control will
beep once the body scan is complete. If a
micro-adjustment is needed, just press the
up/down key on the remote control.
