112
Infinity Chimp Series
Infinity Chimp Series
Recording Fixture Groups
To record your first group, start out by selecting fixtures 1 through 12 by using the Keypad (refer to 15.1
Selecting Fixtures on page 101 for more information).
Storing a Fixture Group Using Group Split Widget
●
Select the fixtures that shall be in the group
●
Open a Group Split Widget by clicking on the Groups button in one of the side menus.
●
Hit the
[Rec]
key. Select an empty item.
●
Select the fixtures that shall be in the group
Storing a Group Using Command Line Interface
●
Select the fixtures you wish to group together
●
Press the
[Rec]
key
●
Press the
[Group]
keypad button.
●
Now, type the number of the item using the Numberblock
●
Press
[Enter]
For example:
[Rec] [Group] [1] [Enter]
Merge (Add) Fixtures into Groups
Sometimes you may need to add some fixtures to a group that already exists.
The confirmation dialog may be omitted by selecting the
Merge
option from the record toolbar after
pressing record.
Alternatively, you can also press
[Infinity]
while pressing
[Rec]
to cycle through the different record
modes.
Merge Fixture(s) into Group using Group Split Widget
●
Select the fixtures you would like to add to an existing group.
●
Open a Group Split Widget by clicking on the Groups button in one of the side menus.
●
Hit the
[Rec]
key on the consoles frontpanel.
●
Select the Group you would like to merge the selected fixtures into.
●
If you did not select an option from the Record-Toolbar, a dialog window asking you what to do will
open.
●
Click on
Merge
.
Merge Fixture(s) into Group using the Commandline Interface
●
Select the fixtures you would like to add to an existing group.
●
Press the
[Rec]
key, followed by the
[Group]
key.
●
Now type the number of the group you would like to add the Fixtures to on the console’s keypad, in
example,
[1]
followed by
[Enter]
.
●
If you did not select an option from the Record-Toolbar, a dialog window asking you what to do will
be shown. Click on
Merge
.
Remove Fixtures from Groups
The confirmation dialog may be omitted by selecting the
Remove
option from the record toolbar after
pressing record.
