2
3
Funciones del display
1
9
0
.0
0 m
m
130.00 mm
1
24
10
23
22
21
1
3
5
6
7
8
20
19
17
18
2
9
4
16 15 14 13 12 11
7.
Microphone Volume Knob: Use this knob to adjust the microphone volume levels.
8.
Microphone Echo Knob: Use this knob to adjust the microphone echo levels.
9.
Guitar volume knob: use this knob to adjust the volume of the guitar.
10.
external Dc12V Input
11.
Microphone Priority: When the microphone priority is activated,speaking into the
microphone
will automatically lower the other audio signal 20dB.
12.
Next Track / Next FM Station (CH+): When using the speaker in USB / TF Card &
Bluetooth mode, press this button to go to the next track.When using the speaker in FM mode,
press this button to go to the next stored FM station.
13. 13.Play/Pause & FM Scan: Press this button to pause the signal from the USB flash drive
TF Card or Bluetooth Inputs. When using the speaker in FM mode, press this button to auto
scan for all available stations. Each station will be stored. Press the CH+ and
CH- to choose a station.
14. Previous Track / Previous FM Station (CH-): When using the speaker in USB / TF Card &
Bluetooth mode, press this button to go to the previous track.When using the speaker in FM
mode, press this button to go to the previous stored FM station
15. Insert the microphone and insert a USB disk or TF card. Press and hold the REC button
on the rear panel for 3-5 seconds to enter the recording. To stop recording, press and hold the
REC button for 3-5 seconds. The recording file is saved in the USB flash drive or TF card.
Recorded files can be deleted on your computer.
16. Mode Selector : Press this button to switch between USB, TF ,FM and Bluetooth Inputs.
TWS:Press TWS button for 3 seconds for bluetooth pairing mode.
17. USB / TF Display Screen: The elapsed time and format will appear on this display screen
for the USB /TF Card inputs.
18. FM Antenna: For best results fully extend the antenna
19. RCA input: connect to CD/DVD, mp3 player, laptop or other audio source deviceThe
input.
20. Insert the guitar into the front panel guitar jack and adjust the guitar volume to the optimal
level.
21. Insert MICPHONE to front panel MIC jack,Adjust MIC VOL and Echo to best level.
22. LED Lights Power Button: Press this button to turn on and off the front LEDs
23. Power Switch: Press this switch turn on and off the speaker. Before powering on the
speaker make sure the volume levels are turned down to prevent damage to the amplifier or
speakers
24. Charging port: plug the power cord into the ac110-240v input port to charge the battery.
3.Main volume knob: use this knob to adjust the volume of USB/TF/BTL/FM music.
4.AUX Input: Connect your smartphone, mp3 player, laptop or other audio device to
this input.
5.Treble Knob: Use this knob to adjust the treble levels.
6.Bass Knob: Use this knob to adjust the bass levels.
1.USB Flash Drive Input: Insert your USB flash drive into this slot. The unit will only read
mp3, .wav, .wma files from the USB flash drive. The maximum storage size of the USB
flash drive cannot exceed 32GB. Do not attempt to connect a computer to the USB input
as the speaker will not be able to connect to a computer.
2.
files from the TFCard flash drive cannot exceed 32GB
TF Input: Insert your TF Card into this slot. The unit will only read .mp3, .wav, .wma
When people sleep, they need a quiet environment.
Please turn off music or turn off the power while sleeping.
Prompt
Thank you for choosing and supporting our Multimedia Speaker Series Products.
Our company' s production management concept:” With talent for development,
with technology for innovation, with management for efficiency,with quality for survival
with service for market”,
Please read this instruction manual for easy operation.
1.SPECIFICATIONS:
K610
Power supply:AC110-240V 50/60Hz
Max Power consumption
:
100W
Frequency response 45Hz - 22kHz
Signal to noise ratio:
≥
80dB
Speaker
diameter:15"x2+1.5"
2
. REMOTE CONTROL
TWS Function introduction and operation:
1.TWS is a wireless pairing between two
speakers in bluetooth mode.
2.When both speakers are switched to
bluetooth mode,Long press the TWS
function key on any machine for 3-5
seconds to enter the TWS matching
state.At this point, the two speakers will be
automatically paired and connected.When
hearing a ”dong“ sound of matching
successfully, at the same time LED display
prompt.
3.Then connect the bluetooth of the phone
to the speakers to play music, and the two
speakers will play music at the same time.
4.You must have a speaker with a TWS
function to use it
MANUAL DE USUARIO
USER'S MANUAL
MANUAL DE USUÁRIO
Summary of Contents for K610
Page 4: ......
