66
Infinisource
5.
The “Main Admin Menu” appears. Press 1 for “System Maint.”
6.
Press 2 for “Memory.”
7.
Press 3 for “Set Clock ID.”
8.
The “Currently” field displays the clock's current ID. Enter a new
ID if desired and press <ENTER>.
You can now exit the time clock menu by pressing <CLR> repeatedly
until the time is shown on the clock display.
Finding the Clock Password
1.
On the clock keypad, press the <MENU> button. The time clock
displays the following:
SELECT MENU FUNCTION
ADMIN PERSONAL
2.
There are two grey buttons directly above the numeric keys on the
clock keypad. Press the button located below “ADMIN” on the
clock display.
3.
The clock prompts you for your card number. Type in a card num-
ber with administrator-level access rights and press <ENTER>.
Note:
The default admin card number is “8888.”
4.
The clock prompts you for a PIN. Enter the appropriate password
(based on the card number used) and press <ENTER>.
Note:
The default admin password is “1111.”
5.
The “Main Admin Menu” appears. Press 3 for “Clock Passcode.”
6.
The current clock password is displayed in the field at the bottom of
the screen. Enter a new password if desired (using the “Prev” and
“Next” buttons for alpha-numeric entry) and press <ENTER>.
You can now exit the time clock menu by pressing <CLR> repeatedly
until the time is shown on the clock display.
Summary of Contents for ETC 100
