InfiniSource ETC 100, Hardware Manual

Page: 61 / 234

TimeForce II Hardware Guide 49
Using the Model IQ 300, 400 or 500 IntelliClock
Passwords
When you select this menu item, the following prompt appears:
PASSWORD ENTER
1. ADMINISTRATOR
2. SUPERVISOR
3. CLOCK MODEM
The Administrator password gives the user full access rights to the
clock menu options.
The
Supervisor password gives the user access to the System Mainte-
nance section of the main menu, but not to System Options.
The
Clock Modem password is the password that is used when the soft-
ware connects to the time clock.
Type in the number for the option you want to access. When you do so,
you receive a prompt asking you to type in the new password. Type in
the password and press <ENTER>. The clock asks you to re-enter the
password. Type in the password and press <ENTER> again. The new
password is now entered into the clock.
See “Downloading Your Time Clock” on page 163 for instructions on
downloading the punches from your time clock.
14 This option is currently undefined. An option may be added here at a
future date.
15 This option enables the Quick Punch feature. With this feature enabled,
employees do not have to press the final <ENTER> when clocking In or
Out.
16 This option is used with the barcode and Proximity card readers. It speci-
fies whether the first or last 5 digits of the card number are to be used.
TABLE: Hardware-1: IntelliClock Options
Number Function