InfiniSource ETC 100, Hardware Manual

Page: 59 / 234

TimeForce II Hardware Guide 47
Using the Model IQ 300, 400 or 500 IntelliClock
System Options
When you select this menu item, the following message appears:
SYSTEM OPTIONS
ENTER OPTION NUMBER
FOLLOWED BY *ENTER*
Type in the option number you wish to access. When you do so, you
receive a prompt inviting you to change the current setting for this
option by typing 1 for Yes or 0 for No. Make changes as you wish. Press
<ENTER> to save your change(s), and <CLEAR> to return to the Main
Menu.
Note: Some options are premium options and must be purchased sepa-
rately. A password is required to activate these options if you did not
purchase them at the same time as your clock.
Options
The following table lists the system options that are available on the
IntelliClocks. Type in the option number, then press <ENTER> to
access the option.
TABLE: Hardware-1: IntelliClock Options
Number Function
1 This option enables keypad entry of employee numbers, so that swipe
cards are not necessary. Type in 1 to enable keypad entry, and 0 to dis-
able it. This is a premium option, and requires a special password. Press
<CLR> to cancel, and <ENTER> to enter your password and access the
option.
2 This option allows the use of barcode time cards. Type in 1 to enable the
option, and 0 to disable it.
3 This number is currently undefined. An option may be added here at a
future date.
4 This option enables the key click. Enable this option if you want the clock
to beep every time a key is pressed. Type in 1 to enable the option, and 0
to disable it.