InfiniSource ETC 100, Hardware Manual

Page: 57 / 234

TimeForce II Hardware Guide 45
Using the Model IQ 300, 400 or 500 IntelliClock
Clear Data Memory
Warning: This option deletes all data that is currently being stored in
the clock. There is no way to recover data that has been deleted from the
clock.
When you select this option, you receive the following prompt:
PLEASE CONFIRM:
DELETE ALL DATA?
NO YES
The <NO> and <YES> buttons are two gray rectangular buttons located
above the numeric keypad on the clock face. The button on the left is the
<NO> button and the one on the right is the <YES> button. Press the
appropriate response. When you have made a selection, you will be
returned to the Memory menu.
Set to Defaults
This option resets the clock ID, Password and all custom-definable
ranges to the default settings. When you select this option, you receive
the following prompt:
PLEASE CONFIRM:
SETTING DEFAULTS
NO YES
Press the appropriate response. When you have made a selection, you
will be returned to the Memory menu.
Set Clock ID
When you select this option, you receive the following prompt:
SET NEW CLOCK ID
CURRENTLY: [XXXXX]
CLOCK ID:
The Currently field shows the current clock ID. By default, this is
“00001.” To change the clock ID, type in the new ID and press
<ENTER>.