InfiniSource ETC 100, Hardware Manual

Page: 23 / 234

TimeForce II Hardware Guide 11
Determining Your Clock Model
Determining Your Clock Model
Each time clock comes with a clock code located on the bottom of the
clock which allows you to determine your clock type. Use the following
instructions to determine your clock model.
Clock Codes
The clock code is located on a sticker on the bottom of the clock. Code
definitions are as follows:
ETC Clocks
Once you have determined your clock type, refer to “Hardware Installa-
tion” on page 18 for instructions on installing and connecting your time
clock.
Time & Attendance Clocks (100 Series)
For model-specific clock usage instructions, see “Time & Attendance
Clock (100 Series)” on page 22.
• 100: Model 100 ETC clock with Serial communication. A Serial
clock is connected directly to a computer’s serial com port. See
page 19 for instructions on installing a Serial time clock.
• 100 D: Model 100 ETC Daisy clock. A Daisy clock is not physi-
cally connected to a computer or phone line, but is “chained” to a
Master time clock. Any Serial clock can be used as the Master in a
Daisy Chain.
• 100 M: Model 100 ETC clock with Modem communication. A
Modem clock is connected directly to an analog ( not digital) phone
line. See page 20 for instructions on installing a Modem time clock.