InfiniSource ETC 100, Hardware Manual

Page: 161 / 234

TimeForce II Hardware Guide 149
Velocity Clocks
Date
To specify the date on the clock select the “DATE” option by either
pressing the number 2 on the clock keypad, or by using the scroll keys
to highlight the option and pressing the <ENTER> key. Using the clock
keypad, enter the appropriate date in the following format: “MM/DD/
YYYY” and press the <ENTER> key.
Manage Finger IDs
Select this option to manage your employees’ finger templates.
Note: See clock usage instructions for detailed instructions on manag-
ing finger templates.
The following options appear under this menu:
1. NEW FINGER ID
2. DELETE
3. CHECK FOR ID
4. GLOBAL SECURITY
New Finger ID
Select this option to enroll an employee’s finger template.
Delete
This option allows you to delete the templates that are being stored by
the time clock on an per-employee basis.
Check For ID
This option allows you to check an employee’s existing finger tem-
plates.
Global Security
By default the global security level for finger IDs is set to 3, the middle
level of security. If you wish to, you may change the global security set-
ting, though this is not recommended.
Clock Setup
This menu allows you to customize how your time clock functions by
configuring various system options. See page 152 for a detailed break-
down of this menu and its options.