InfiniSource ETC 100, Hardware Manual

Page: 127 / 234

TimeForce II Hardware Guide 115
Velocity Clocks
• Enter the Time . By default this field is populated with the sys-
tem time of the machine that ClockLink is installed on. Click
on the up and down arrow keys at the end of the field to select
the time, or place your cursor in the field and manually type the
desired time. Select the
Use System Time option to restore the
system date/time.
• Click on the [OK] icon to send the date and time to the clock.
You can now exit the ClockLink utility.
Note: The date and time can also be manually specified from the clock
keypad. See “Set Date/Time” on page 148 for further instructions.
V800 Clock Usage Instructions
The V800 is an advanced model of clock with many options and fea-
tures. It can be used to restrict employee punching, requiring a supervi-
sor override for unassigned employees. This model also allows your
employees to view various information at the clock itself such as accrual
totals and the date and time of their last clock entry.
Creating a Clock Profile
The time clock allows employees to access their current punch, sched-
ule, accrual, and departmental information directly from the clock. This
information is sent to the time clock using the ClockLink utility. A time
clock profile must be created in TimeForce for each time clock.
1. Open the TimeForce software and log in as a user with administra-
tive rights.
2. Click on the main “Clocks” navigation tab at the top of the screen.
3. From the New Clocks section, click on the [ADD CLOCK] icon.
4. Select “V800” from the Model drop-down menu.
5. Enter the clock Number . This number is assigned in the memory of
the time clock itself. The default number is “1.”
6. Enter the clock Password . This is the password that is assigned at
the time clock itself. The default clock password is “V800.”