InfiniSource ETC 100, Hardware Manual

Page: 118 / 234

106 Infinisource
Finding the Clock ID
1. On the clock keypad, press the <MENU> button. Select 1 for
“ADMIN.”
2. The clock prompts you for your card number. Type in a card num-
ber with administrator-level access rights and press <ENTER>.
Note: The default admin card number is “8888.”
3. The clock prompts you for a PIN. Enter the appropriate password
(based on the card number used) and press <ENTER>.
Note: The default admin password is “1111.”
4. The “Main Admin Menu” appears. Press 3 for “Clock Setup.”
5. Press 2 for “Clock ID/Pass.”
6. Press 1 for “Clock ID.”
7. The “NOW:” field displays the clock's current ID. Enter a new ID if
desired and press <ENTER>.
Note: The clock ID may be up to 10 digits in length.
You can now exit the time clock menu by pressing <CLR> repeatedly
until the time is shown on the clock display.
Finding the Clock Password
1. On the clock keypad, press the <MENU> button. Select 1 for
“ADMIN.”
2. The clock prompts you for your card number. Type in a card num-
ber with administrator-level access rights and press <ENTER>.
Note: The default admin card number is “8888.”
3. The clock prompts you for a PIN. Enter the appropriate password
(based on the card number used) and press <ENTER>.
Note: The default admin password is “1111.”
4. The “Main Admin Menu” appears. Press 3 for “Clock Setup.”
5. Press 2 for “Clock ID/PASS.”
6. Press 2 for “Passcode.”
7. The current passcode is displayed. Use the alpha-numeric keypad to
enter the passcode you desire. When done, press the <OUT> key.
When prompted to save your changes, press [YES].