InfiniSource ETC 100, Hardware Manual

Page: 113 / 234

TimeForce II Hardware Guide 101
Using the Model IQ 1000 IntelliClock
2. Enter your card number and password. The Main Menu appears.
Note: The default administrator username is “8888.” The default
admin password is “1111.”
3. Select 1 for “SYSTEM MAINT.”
4. Select 6 for “OUTBOUND OPTIONS.”
5. Select 3 for “ENTER SERVER IP.”
6. From the keypad of the clock, enter the IP address of the Push
Server. Remember to use the period [ . ] key. Once the IP has been
entered, press <ENTER>. The “Port” screen appears.
7. Enter the port number at the clock keypad. Press the upper-right
soft key to automatically populate this setting with the default of
“5705.”
Note: In most cases, the default setting will be used.
8. Press the <ENTER> key to save the changes that you have made.
You can now exit the clock menu.
Set Call Times
The time clock allows you to specify how stored punches are uploaded
to the database.
1. From the keypad of the clock, press the <MENU> button and select
“ADMIN.”
2. Enter your card number and password. The Main Menu appears.
Note: The default administrator username is “8888.” The default
admin password is “1111.”
3. Select 1 for “SYSTEM MAINT.”
4. Select 6 for “OUTBOUND OPTIONS.”
5. Select 1 for “SET CALL TIME(S).”
6. The “Set Dial Times” screen opens. The following options are
available: