98
Infinisource
Adjust Display Contrast
The IQ 1000 is equipped with a control which allows you to adjust the
contrast of the main clock display screen.
1.
Remove the time clock from the wall (if mounted). The contrast
control is located on the back of the clock.
2.
Turn the clock over and examine the back of the clock case. At the
top of the case are two horizontal slots used to attach the clock to
the mounting panel. Directly below the horizontal slot on the left is
a cut-out hole. This is the contrast control.
3.
Insert a small screwdriver (either phillips or flathead) into the hole,
and adjust the display contrast as desired.
Reboot Sequence
If for some reason you need to reboot your IQ 1000, this action can be
performed by pressing a sequence of keys at the clock keypad. This
sequence is <MENU>, < 7 > and <ENTER>.
This option is useful for when rebooting is necessary on a clock that is
mounted with no access to the power adapter.
Enter Date and Time Screen
If for some reason your time clock loses the stored date and time, the
“Enter Date and Time” screen appears.
The following prompt appears on the clock display:
CURR DATE: XX/XX/XXXX
MONTH:
•
Enter a number between 1 and 12 to denote the desired month and
press <ENTER>. “DAY” appears below the specified month set-
ting.
•
Enter the desired date and press <ENTER>. “YEAR” appears
below the specified day setting.
•
Enter the desired year and press <ENTER>.
Summary of Contents for ETC 100
