1
Quick Installation Guide
This manual provides instructions for quick installation and basic configuration of your IP device.
Step1. Connect cables to IP device
Connect required cables to the device including the power cable, LAN cable, and other optional
cables. To see the correct positions of all connectors, refer to the following image below.
A.
Ethernet Port [PoE]
B.
Composite Video Out
C.
RS485 Port
D.
Alarm Output
E.
Alarm Input
F.
Audio Out
G.
Audio In
H.
DC Power
Make sure the polarity is correct. Incorrect connection
may cause malfunction or damage to the IP device.
Caution
!
Power Adaptor Connector (DC 12V)
* Models herein and their appearance are subject to change without any prior notice.
